Call: 305-437-9761
Home | About Us | Forms | Contact Us | Directions | Blog | Videos | Policies & Disclaimers

FAS Sale

Home » Access Control » Turnstiles

 Checkout
Manufacturer: Tomsed
Boon Edam / Tomsed Space Saving Double Gate Turnstile THT100TC
Boon Edam / Tomsed Space Saving Double Gate Turnstile THT100TC

Model THT-100TC Full Height Dual Electric Motor Security Turnstile

Designed to combine the functions of two single rotor turnstiles into one turnstile.

Space Saving Double Gate Turnstile (Hot Dipped Galvanized Steel Finish)

The inter - meshing of the left and right - hand rotors allows reduction in overall width from 10 feet with 2 single rotor turnstiles to 8 feet with a space saving double gate, with no reduction of passage space. A 7 foot version is also available for extra small applications with only a minimal entry space reduction.

Construction of all double gates matches single rotor turnstiles. Fully welded middle - barrier is included with all 3 rotor section turnstiles in order to prevent unauthorized entry through midsection of turnstile. Double gate can have up to 4 control points, two entry's and two exits. Each rotor can be supplied with electrical operation in one or two directions. Any combination of fail - lock or fail - safe is available. Fail - lock is best suited for entry while virtually all controlled exits should be fail - safe to comply with local building codes. All fail - lock applications automatically include a mechanical key release to allow manual override in an emergency. Model shown above is powder coated (THT-100TCP) with stainless steel arms.

FEATURES 100TC:
  • Heel Protectors - Heavy Duty foam rubber sleeves to cover bottom turnstile arms. Three required for each rotor of THT-100T(3). (Optional)
  • Electrical Controls - Electrical controls for entry only, exit only or independent bi - directional controls for both entry and exit. (Standard Feature for electrically operated turnstiles)
  • 3 or 4 Rotor Sections - Available with 3 rotor sections (120 degrees apart) or 4 rotor sections (90 degrees apart).
  • Out of Use Lock - For mechanical turnstiles, loops on turnstile to allow turnstile to be locked using padlock. (Optional for mechanical turnstiles)
  • Indicator Lights - Set of red and green lights to indicate if turnstile is locked or unlocked. One set per electrically controlled direction. (Optional)
  • Fail - lock or Fail - safe - For electrically controlled direction. Status of turnstile when there is no power. Fail - lock direction is locked, fail - safe is free wheeling. (Standard Feature for electrical directions)
  • Solenoid Activation Switch - Provides Form "C" contact closure to access control system that turnstile solenoid has been activated. (Optional)
  • Free or Locked Operation - For mechanical operation, direction is always locked or always free rotating. (Standard Feature for mechanical directions)
  • Ceiling Canopy - Full rectangular stainless steel ceiling canopy instead of standard partial ceiling plates. (Optional)
  • Voltage - Transformer to step down from 110 VAC or 220 VAC. (Standard Feature for electrical turnstiles)
  • Rotation Detection Switch - Provides a Form "C" contact closure to the access control system for remote counting and monitoring of turnstile rotations. (Optional)
  • Home Position Switch - Provides a Form "C" contact closure to access control system when turnstile is in home position. (Optional)
  • Time - out Relay - Relay to automatically relock turnstile within a preset time if a person cards in and unlocks turnstile but does not go through. (Optional)
  • Card Reader Mounting Plate - Plate to allow mounting of reader on shield post. (Optional)
  • Hydraulic Speed Control - Heavy duty shock system that controls rotation speed of turnstile to mimimize turnstile abuse and provide increased ease of use. Specifically designed for high volume, abusive conditions. (Optional)
  • Mechanical Key Bypass - Key to allow fail - lock direction to be opened during power failure. Standard for fail - lock applications.
  • 96" or 84" Width - Standard turnstile is 96" (8 feet) wide. Space saving version with 84" (7 feet) is also available.
  • Electronic Key Bypass - Key to allow turnstile to be held open, overriding card reader. (Optional)
  • Remote Push - button - Allows turnstile to be released from remote location for one rotation. (Optional)
  • Pulse Relay - Allows one rotation per valid "go" signal regardless of signal length. (Optional) Recommended option
 
Price: Please call for special pricing
(305) 437-9757

 
« Previous | Next »

SHOP BY BRANDS

Aegis
Aiphone
Altronix
Apollo
AWID
BFT
BOSCH
Cartell


Chamberlain
Doorbell Fon
Eagle
Elite
EMX
FAAC
FAS
GNR Technologies


GTO
Guardian
Hamilton
Hy-Security
ISI
Liftmaster

Linear
Magnetic Autocontrol
Max

Miller Edge
MMTC
Multi-Code
Nice
Omron
Securakey
Sentex
Sysparc
Tomsed

6929 NW 52nd Street Miami , Florida 33166 Ph. 305.437.9761 (Español) 305.437.9757 (English)  Fax: 305.437.8247 or call us toll free at: 1-800-803-8093
Email: email@fastaccesssecurity.com | sales@fastaccesssecurity.com